How to connect the Internet on the iPhone?

Watch the video

How to connect the Internet on the iPhone?

Typically, when you activate Apple products, the Internet setting is automatically. However, there may be a problem and the network will stop working. In this case, you will have to configure access yourself. Today we will look at how to connect the Internet on iPhone.

If your SIM card is corporate, then most likely the service allowing the phone to access the Internet will be disabled. In this case, you must contact your mobile operator and order this service.

How to set up 3G

Check the connection of the mobile Internet service, and then go to the settings of your phone: click "Settings" and go to "Cellular communication". Then enable �Cellular Data - Enable 3G / LTE�.

Check if the 3G / LTE icon is lit in the left corner of the phone screen. If the letter "E" is lit, this means that the signal of the 3G / LTE network is missing.

If you experience problems connecting the 3G / LTE signal, you need to check the data transmission setting.

Setting up data transfer

To do this, you need to go to the menu of your phone and select "Basic Settings", then "Network", and then "Cellular data network".

Next you will see three items: "APN", "Username", "Password". It is necessary to check whether the settings match your cellular operator.


  • APN:
  • Username: mts
  • Password: mts


  • APN: internet
  • Username: (left blank)
  • Password: (left blank)


  • APN:
  • Username: beeline
  • Password: beeline


  • APN:
  • Username: (left blank)
  • Password: (left blank)

Also, the settings for connecting to the Internet can be found by calling your mobile operator.

If when checking the settings it turns out that the data is entered incorrectly, then click the "Reset settings" button, restart the phone and enter the data again.

If in this case the 3G / LTE signal will not work, then you need to contact the support service of your mobile operator.

Read our article How to set up 3G on iPhone.

How to set up Wi-Fi

Connect the Wi-Fi signal on the iPhone in several ways.

If the router (router) distributes IP addresses automatically

In this case, you need to go to the settings of your phone.Click on "Settings" and select "Wi-Fi".

Check if the slider is on, if not, then move it to activate the Wi-Fi signal connection.

Next, select the desired network name and enter the password.

If the router (router) distributes IP addresses automatically or requires to register DNS

In this case, you must click on the button to the right of the network and set the network settings.

If it happened that Wi-Fi is configured, but the connection to the network does not occur, then in the network settings, select the "Forget this network" option and write the settings again.

If you have problems, you need to restart both the iPhone and the router itself.

Related News

How to care for your skin before the summer of 20-25-35-45 years
How to pack a gift in a gift paper
Why never need to make a bed
Weave bright bracelet from lace
Fines for legal entities in 2018
Do I have to fight for a man
Home Shawarma