The 12 cm tall souvenir is made of satin ribbons, decorated with flowers of foamiran.For its production we take the following materials: - a piece of thick foam. - satin ribbon with a width of 1 cm bright green color, 3.5 meters long. - pins with round heads. - wire. - medical plaster in a roll. - scissors.- toothpicks. - white, pink and green foamiran cuts. - Moment glue. - green foil cut. - yellow semi-beads. And we will begin work with polyfoam. Cut a cube with sides of 7x 4 cm and a height of 5 cm. We round the corners.Retreating 0.5 cm from the edge, we stick pins with heads along the entire perimeter at a distance 1 cm between them. I got 16 pieces.But the same row of pins is also needed on the opposite side of the blank.Now take the selected tape of 1 cm in length by 3.5 meters.Secure the edge of the tape on one of the middle circles of the pins. Bend the tape with a pin and stretch it to the parallel lower needle. We also circle it with a ribbon and go up, turn it around the needle again and go down to the other pin. So we move along the whole circle, grabbing the upper one, then the bottom one.When we got to the beginning of the first fixing, movement of the tape must be changed.Now the ribbon will move along the needles of the top row only. We tape the first pin and go to the second, moving along the whole row. Having reached the first needle, we repeat one more row and when two rows are ready, drop the ribbon down to the next circle of pins.And on the lower circle there will be only one row scrolls.Now you should fix all the pins, tightly pressing them to the base.And the center, on which the edges of the tape are fixed, should be covered, gluing the form from green foil. This will be the bottom of the basket.The ribbon base is ready. Now we wire the plastic foam parallel to the top edge, backing down 1 cm. We bend the wire in the shape of a handle, and the loose ends are simply twisted.On one side of this pen, fasten the ribbon and tie a bow.For now, leave this basket in this form. Let's start making flowers. From the trimmed plastic suede pink and white, cut out the petals in the form of droplets 1.5-2 cm tall. There will be 13 flowers. And for one we take 7-8 petals, 2 leaves of arbitrary shape from green suede and a toothpick.Glue the first two petals tightly to the base.And we fix all the other petals with glue" Moment "in a circle,lubricating only the bottom of the workpiece.When the flower is collected, add two green leaves.Now flowers everyone is ready. You can break off sharp edges. It is up to you.We return to our basket and sit down all the flowers, just sticking into the foam. Basket full of flowers. Getting down to the handle. We wrap the whole wire with a medical plaster.Then with a ribbon, start from the bow, scroll on the patch from above, press down well. The handle is ready, but we attach a small bow to the side.Decorate two wide sides with yellow half-beads and a heart.We attach bows at the edges of the handle with pins.This is the end of this work, the souvenir-basket is done. Achi!
Perfume, emphasizing individuality
How to sew a skirt-tulip
Casket for tea
Embroider a sparkling penguin brooch
Cool optical illusions that will blow your mind off you are easy to fool
Jennifer Lopez trains even on a yacht
Construction of cottages